Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011
404HP
Engine Model
Cat C13
Note (1)
Cat engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Engine Power @ 1,700 rpm – ISO 14396:2002
432HP
Gross Torque @ 1,200 rpm – SAE J1995:2014
1636lb/ft
Gross Power @ 1,700 rpm – SAE J1995:2014
436HP
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
1515lb/ft
Displacement
12.5L
Engine Torque @ 1,200 rpm – ISO 14396:2002
1620lb/ft
Weights
Operating Weight
78264lb
Note
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun
Bucket Capacities
Bucket Range
4.8-17.2 m³ 6.25-22.5 yd³
Transmission
Forward - 1
3.9mile/h
Forward - 2
7.3mile/h
Forward - 3
13mile/h
Forward - 4
24.5mile/h
Note
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
Reverse - 1
4.4mile/h
Reverse - 2
8.4mile/h
Reverse - 3
17.4mile/h
Sound
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives.”
Note (2)
European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
107
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
110dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
75
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
70dB(A)
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
Operating Specifications
Breakout Force
59060lbf
Note (1)
For a machine configuration as defined under Weight.
Note (2)
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection
22418kg
Static Tipping Load - Full 40° Turn - With Tire Deflection
46526lb
Service Refill Capacities
Cooling System
13.7gal (US)
Crankcase
9.8gal (US)
DEF Tank
5.5gal (US)
Differential - Final Drives - Front
24.3gal (US)
Differential - Final Drives - Rear
24.3gal (US)
Fuel Tank
112.5gal (US)
Hydraulic Tank
40.4gal (US)
Transmission
20.3gal (US)
Hydraulic System
Implement System - Maximum Operating Pressure
4975psi
Implement System - Maximum Pump Output at 2,250 rpm
119gal/min
Hydraulic Cycle Time - Total
10.1 seconds
Dimensions
Note
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight
9.4ft
Centerline of Rear Axle to Hitch
6.3ft
Ground Clearance
1.4ft
Height - Top of Exhaust Pipe
12.4ft
Height - Top of Hood
10ft
Height - Top of ROPS
12.6ft
Hinge Pin Height at Carry
2.11ft
Hinge Pin Height at Maximum Lift
16.1ft
Lift Arm Clearance at Maximum Lift
13.4ft
Overall Length - Without Bucket
29.11ft
Tread Width
8.4ft
Wheel Base
12.6ft
Width over Tires (Loaded)
11.5ft
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight
8.95ft
Centerline of Rear Axle to Hitch
6.3ft
Ground Clearance
428mm
Height - Top of Exhaust Pipe
3736mm
Height - Top of Hood
3036mm
Height - Top of ROPS
3801mm
Hinge Pin Height at Carry
2.7ft
Hinge Pin Height at Maximum Lift
4741mm
Lift Arm Clearance at Maximum Lift
3902mm
Overall Length - Without Bucket
8597mm
Tread Width
8.4ft
Wheel Base
3800mm
Width over Tires (Loaded)
11.5ft
Standard Equipment:
Operator Environment
Cab, pressurized, sound suppression
EH implement controls, parking brake
Steering, joystick
Seat, suede/cloth, air suspension, heated
Touchscreen display
Visibility: mirrors, rear-vision camera
Mirrors, heated
Air conditioner, heater, defroster (auto temp, fan)
Sun visor, front, retractable
Sun visor, rear, retractable
Window cleaning platform, front
Windows, front, safety laminated rounded glass
On-board Technologies
Cat Payload scale
Autodig with Auto Set Tires
Operator ID & machine security
Application Profiles
Job Aids
Controls Help and eOMM
Power Train
Cat C13 engine
Electric fuel priming pump
Fuel-water separator and secondary fuel filter
Engine, air precleaner
Axles, open differentials
Axles, ecology drains
Transmission, continuous variable
Rimpull control
Throttle lock mode
Service brakes, hydraulic, fully enclosed wet disc, wear indicators
Hill and speed hold on grades
Park brake, caliper on front axles, spring applied-pressure released
Hydraulics
Implement system, load sensing with variable displacement piston pump
Steering system, load sensing with dedicated variable displacement piston pump
Ride control, dual accumulators
Oil sampling valves, Cat XT™ hoses
Electrical
Starting and charging system, 24V
Starter, electric, heavy duty
Lights: halogen, 4 work lights, 2 rear-vision lights
Lights: roading with turn signals
Monitoring System
Front dash with analog gauges, LCD display, and warning lights
