Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011
393HP
Engine Model
Cat C13
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Note (1)
Cat engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Gross Torque @ 1,200 rpm – SAE J1995:2014
1627lb/ft
Engine Torque @ 1,200 rpm – ISO 14396:2002
1612lb/ft
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
1539lb/ft
Engine Power @ 1,700 rpm – ISO 14396:2002
420HP
Gross Power @ 1,700 rpm – SAE J1995:2014
425HP
Weights
Operating Weight
66877lb
Note
Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s
Bucket Capacities
Bucket Range
4.0-14.5 m³ 5.25-19 yd³
Transmission
Forward - 1
4.4mile/h
Forward - 2
8.4mile/h
Forward - 3
14.9mile/h
Forward - 4
24.5mile/h
Note
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
Reverse - 1
5mile/h
Reverse - 2
9.6mile/h
Reverse - 3
18.3mile/h
Sound
Note (1)
For machines in European Union countries and in countries that adopt the EU Directives.
Note (2)
European Union Directive 2000/14/EC as amended by 2005/88/EC.
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
110
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
107dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
75
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
70dB(A)
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
Operating Specifications
Breakout Force
51008lbf
Note (1)
For a machine configuration as defined under Weight.
Note (2)
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection
20965kg
Static Tipping Load - Full 40° Turn - With Tire Deflection
43432lb
Service Refill Capacities
Cooling System
13.7gal (US)
Crankcase
9.8gal (US)
DEF Tank
5.5gal (US)
Differential - Final Drives - Front
24.3gal (US)
Differential - Final Drives - Rear
24.3gal (US)
Fuel Tank
112.5gal (US)
Hydraulic Tank
40.4gal (US)
Transmission
20.3gal (US)
Hydraulic System
Implement System - Maximum Operating Pressure
4975psi
Hydraulic Cycle Time - Total
10.1 seconds
Dimensions
Note
All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight
8.9ft
Centerline of Rear Axle to Hitch
6.3ft
Ground Clearance
1.5ft
Height - Top of Exhaust Pipe
12.5ft
Height - Top of Hood
10.1ft
Height - Top of ROPS
12.7ft
Hinge Pin Height at Carry
2.2ft
Hinge Pin Height at Maximum Lift
15.7ft
Lift Arm Clearance at Maximum Lift
13.6ft
Overall Length - Without Bucket
27.5ft
Tread Width
8ft
Wheel Base
12.6ft
Width over Tires (Loaded)
10.9ft
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight
8.7ft
Centerline of Rear Axle to Hitch
6.3ft
Ground Clearance
456mm
Height - Top of Exhaust Pipe
3764mm
Height - Top of Hood
3064mm
Height - Top of ROPS
3829mm
Hinge Pin Height at Carry
2ft
Hinge Pin Height at Maximum Lift
4554mm
Lift Arm Clearance at Maximum Lift
3881mm
Overall Length - Without Bucket
8155mm
Tread Width
8ft
Wheel Base
3800mm
Width over Tires (Loaded)
10.9ft
Standard Equipment:
Operator Environment
Cab, pressurized, sound suppression
EH implement controls, parking brake
Steering, joystick
Seat, suede/cloth, air suspension, heated
Touchscreen display
Visibility: mirrors, rear-vision camera
Mirrors, heated
Air conditioner, heater, defroster (auto temp, fan)
Sun visor, front, retractable
Sun visor, rear, retractable
Window cleaning platform, front
Windows, front, safety laminated rounded glass
On-board Technologies
Cat Payload scale
Autodig with Auto Set Tires
Operator ID & machine security
Application Profiles
Job Aids
Controls Help and eOMM
Power Train
Cat C13 engine
Electric fuel priming pump
Fuel-water separator and secondary fuel filter
Engine, air precleaner
Axles, open differentials
Axles, ecology drains
Transmission, continuous variable
Rimpull control
Throttle lock mode
Service brakes, hydraulic, fully enclosed wet disc, wear indicators
Hill and speed hold on grades
Park brake, caliper on front axles, spring applied-pressure released
Hydraulics
Implement system, load sensing with variable displacement piston pump
Steering system, load sensing with dedicated variable displacement piston pump
Ride control, dual accumulators
Oil sampling valves, Cat XT™ hoses
Electrical
Starting and charging system, 24V
Starter, electric, heavy duty
Lights: halogen, 4 work lights, 2 rear-vision lights
Lights: roading with turn signals
Monitoring System
Front dash with analog gauges, LCD display, and warning lights
