Underground - Hard Rock

Engine

Engine Model
CatĀ® C15
Gross Power - SAE J1995
409HP
Bore
5.4in
Stroke
6.8in
Displacement
927.9inĀ³
Rated Power
1800r/min
Gross Power - Tier 3 Engine - SAE J1995
409HP
Gross Power - VR Engine - SAE J1995
409HP
Note (2)
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25Ā° C (77Ā° F). Performance measured using fuel to EPA specificat
Note (4)
Optional Ventilation Reduction Package available.
Note (1)
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (3)
No engine derating required up to 591 m (1,938 ft) altitude.
Note (5)
Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

Operating Specifications

Rated Payload
37920lb
Gross Machine Mass
155095lb
Static Tipping Load - Straight Ahead - Lift Arms Horizontal
88015lb
Static Tipping Load - Full Turn - Lift Arms Horizontal
75109lb
Breakout Force - SAE
60298lb

Hydraulic Cycle Times

Raise
9.2s
Dump
3.4s
Lower, Empty, Float Down
3.1s
Total Cycle Time
15.7s

Turning Dimensions

Axle Oscillation
8Ā°
Articulation Angle
42.5Ā°
Inner Clearance Radius
133.2in
Outside Clearance Radius
288.3in

Transmission

Forward - 1
3.4mile/h
Forward - 2
6mile/h
Forward - 3
10.7mile/h
Forward - 4
18.5mile/h
Reverse - 1
4.1mile/h
Reverse - 2
7.3mile/h
Reverse - 3
13mile/h
Reverse - 4
22mile/h

Tires

Tire Size
29.5 Ɨ 29

Service Refill Capacities

Front Differential and Final Drives - With Axle Oil Cooling System
42gal (US)
Rear Differential and Final Drives - With Axle Oil Cooling System
44.1gal (US)
Engine Crankcase
9gal (US)
Fuel Tank - Dual
376.4gal (US)
Cooling System
19.8gal (US)
Front Differential and Final Drives
31.4gal (US)
Hydraulic Tank
37gal (US)
Rear Differential and Final Drives
33.5gal (US)
Transmission
16.4gal (US)

Weights

Note
*Calculated Weight.
Operating Mass + Rated Payload* - Rear Axle
37895lb
Operating Mass*
110692lb
Operating Mass + Rated Payload* - Front Axle
110716lb
Operating Mass* - Front Axle
50832lb
Operating Mass + Rated Payload*
148611lb
Operating Mass* - Rear Axle
59860lb

Standards

Cab - FOPS
ISO 3449, SAE J231, AS2294.3, EN13627
Brakes
ISO 3450, AS2958.1, CAN-CSA424.30-M90
Cab - ROPS
ISO 3471, SAE J1040, AS2294.2, EN13510

Bucket Capacities

Dump Bucket - 4
11.6ydĀ³
Dump Bucket - 2
9.4ydĀ³
Dump Bucket - 3
10.9ydĀ³
Dump Bucket - 1
8.2ydĀ³

Standard Equipment:

  • Electrical
    • Engine shutdown switch
    • Lighting: Bucket lip
      ā€“ External, front, rear, stop light, dual halogen
    • Receptacle Group, auxiliary start
    • Starter, electric, 24-volt
    • Starting and charging system
    • Alarm, reversing
    • Alternator, 95 amp
    • Battery disconnect switch, ground level
    • Batteries, low maintenance
    • Diagnostic connector
  • Operator Environment
    • Automatic Brake Application (ABA)
    • Cab:
      ā€“ Cab, open, ROPS/FOPS
    • Caterpillar Electronic Monitoring System (CEMS), dash instrumental panels
    • Horns, electric
    • Instrumentation/gauges:
      ā€“ Speedometer/tachometer
      ā€“ Fuel level
      ā€“ Hydraulic oil temperature
      ā€“ Engine coolant temperature
    • Operator presence system
    • Light, warning, residual brake
    • Mounting, ROPS
    • Pilot hydraulic implement controls (single joystick)
    • Seat:
      ā€“ Seat, suspension, vinyl
    • Seat belt, retractable
  • Power Train
    • Brakes, full hydraulic enclosed wet multiple-disc (SAFR)
    • Engine:
      ā€“ Cat C15 six cylinder diesel
      ā€“ Air-to-air aftercooler (ATAAC)
    • Exhaust:
      ā€“ Exhaust, purifier, muffler
    • Filter, engine, remote mounted
    • Fuel adapters:
      ā€“ Standard fill, dual, rubber coated, double steel braided fuel lines
    • Fuel priming pump
    • Park Brake Switch Engagement (choose between):
      ā€“ Push to Apply
      ā€“ Pull to Apply
    • Pre-cleaner, engine air intake
    • Torque converter, lock-up clutch (LUC)
    • Transmission:
      ā€“ Electronic Clutch Pressure Control (ECPC)
      ā€“ Auto planetary powershift (4F/4R)
      ā€“ Transmission neutralizer
  • Other Standard Equipment
    • Brake axle cooling
    • Cap, radiator, manual release
    • Catalytic exhaust purifier/muffler
    • Dump bucket
    • Bucket lip:
      ā€“ Lip weldings ā€“ full weld edge or tack weld edge and corners
    • Decals, International Picto Graphics
    • Fenders, front, rear
    • Firewall
    • Guards, engine and transmission
    • Handholds
    • Lift arm positioner for return to dig
    • Radiator grill, swing out
    • Service oil sample
    • Valve, drain, transmission oil filter
    • Valve, hydraulic, standard
    • Windows:
      ā€“ Single pane
  • Tires, Rims, And Wheels
    • Tires arrangements: tires must be selected from the Mandatory Attachments section, choose between:
      ā€“ Tire, 29.5 Ɨ R29 VSMS 2 Bridgestone
      ā€“ Tire, 29.5 Ɨ R29 VSDL L5 Bridgestone
    • Rims (set of four): five piece, tubeless

Optional Equipment:

  • Electrical
    • Battery disconnect switch, in cab
    • Lighting:
      ā€“ Cat LED work lights
      ā€“ Truck loading light
  • Operator Environment
    • Cab:
      ā€“ Cab, enclosed, ROPS/FOPS
    • Camera, color rear facing
    • Duct, air, flow diverter
    • Idle timer (enclosed cab)
    • Instrumentation/gauges:
      ā€“ Brake pressure
    • Seat:
      ā€“ Seat, suspension, tee, vinyl
      ā€“ Seat, suspension, air, vinyl
      ā€“ Seat covers, tee, air and standard
  • Technology Products
    • Command for Underground*
    • Vital Information Management System (VIMS) Gen 3
    • Payload system, Loadrite
    • Remote Control Interface (excludes transmitter and receiver) ā€“ RCT
    • Note: *Please consult with your Regional Commercial or Technology Representative prior to upgrading your machine to Command for Underground.
  • Tires, Rims, And Wheels
    • Rim identification numbering
    • Spare rim (tubeless)
  • Power Train
    • Exhaust:
      ā€“ Particulate filter, Flow Thru
      ā€“ Particulate filter, Wall Flow
    • Fuel adapters:
      ā€“ Standard fill, dual, stainless steel covered, single braided fuel lines
      ā€“ Fast fill, dual, rubber coated, double steel braided fuel lines
      ā€“ Fast fill, dual, stainless steel covered, single braided fuel lines
    • Secondary Steering System
    • Engine Options:
      ā€“ Engine, Ventilation Reduction (VR)
      ā€“ VR engine, Flow Thru Ready
      ā€“ Engine, Tier 3
  • Other Optional Equipment
    • Brake Release Arrangements:
      ā€“ Recovery hook
      ā€“ Recovery bar
    • Buckets:
      ā€“ Various sizes, dump (6.3 m3/8.2 yd3 to 8.9 m3/11.6 yd3)
      ā€“ Light materials, dump, uninstalled (10.5 m3/13.7 yd3, 11.6 m3/15.2 yd3)
    • Bucket lip:
      ā€“ Modular weld-on
      ā€“ Bolt-on lips
      ā€“ Durilock
    • Ground Engaging Tools:
      ā€“ Cutting edge, Cat weld-on
      ā€“ Cutting edge, bolt-on half arrow
      ā€“ Cutting edge, shrouds, Durilock
      ā€“ MAWPS ā€“ bucket lip protection
      ā€“ Heel shrouds
      ā€“ Wear bars
      ā€“ Liners
      ā€“ Overflow guard
    • Faster fill and evacuation systems:
      ā€“ Engine, Fast Fill
      ā€“ Radiator, Fast Fill
      ā€“ Hydraulic, Fast Fill
      ā€“ Transmission, Fast Fill
    • Draw bar attachment, bolt-on
    • Fire Suppression System:
      ā€“ Ansul, dry powder
      ā€“ Foam, water based
    • Fluids:
      ā€“ Arctic coolant
      ā€“ Arctic fuel
    • Guard, light and window
    • Handrails
    • Lubrication System:
      ā€“ Automatic
      ā€“ Centralized
    • Mine Transfer
    • Reversible steering
    • Reflective tape
    • Ride Control System
    • Service tools:
      ā€“ Collet jacking bolts
      ā€“ Recovery bar
    • Vandalism protection
    • Windows
      ā€“ Dual pane
    • Wear protection bars:
      ā€“ Cab/ROPS
      ā€“ Hydraulic tank
      ā€“ Radiator