U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final), Korea Tier 4 Final OR China Nonroad Stage III/UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage IIIA
Note (1)
All nonroad Tier 4 Interim and Final, Stage IIIB, IV and V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Weights
Operating Weight
63900lb
Operating Weight - Wide Gauge
71218lb
Operating Weight - Waste Handler
64319lb
Operating Weight - Steel Mill
74293lb
Note (1)
Subtract approximately 295 kg / 650 lb for machines not equipped with Tier 4 Final/Stage V emissions reduction technology.
Buckets
Capacity - General Purpose
4.2yd³
Capacity - Multi-Purpose
4yd³
Capacity - Performance Series
5yd³
Capacity - Landfill
6.4yd³
Capacity - Slag
4yd³
Width - General Purpose
117in
Width - Multi-Purpose
116in
Width - Performance Series
117in
Width - Landfill
117in
Width - Slag
112in
Service Refill Capacities
Fuel Tank
101.5gal (US)
DEF Tank
9.2gal (US)
Dimensions
Overall Machine Length*
298.4in
Machine Height - Top of Cab
138.2in
Height - Top of Stack
120.8in
Overall Machine Height - Bucket Fully Raised
226.5in
Overall Machine Width without Bucket: With Standard Tracks - 550 mm (21.6 in) Shoes
106.7in
Note
*With General Purpose bucket and heavy duty teeth.
Undercarriage
Track Gauge
85in
Track Shoe Width - Standard
21.6in
Track Shoe Width - Optional
26.6in
Track Shoe Width - Wide Gauge
32.7in
Track on Ground
115.3in
Ground Contact Area* - Standard Shoe - 550 mm (21.6 in)
Ground Pressure* - Standard Shoe - 550 mm (21.6 in)
11.3psi
Ground Pressure* - Optional Shoe - 675 mm (26.6 in)
9.3psi
Ground Pressure* - Wide Gauge - 830 mm (32.7 in)
8.3psi
Note
*ISO 16754:2008.
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.
Standard Equipment:
Note
Standard and optional equipment may vary. Consult your Cat dealer for details.
Power Train
Cat C9.3 diesel engine, turbocharged with ATAAC
Modular cooling system for engine air intake, oil and water
Radiator fan, electronically controlled, hydraulically driven, temperature sensing, on demand
Electro Hydrostatic Control (EHC) for transmission with travel and work modes
Fuel cooler
Water separator
Air cleaner dry-type, axial seal with integral precleaner and dust ejection system, electronic filter condition indicator
Caterpillar extended life coolant
Undercarriage
Heavy Duty tracks
Track guiding guards, end section
Hydraulic track adjuster
Sprocket rims, with replaceable bolt-on tough steel segments
Sprocket guards
Seven track rollers, two upper carrier rollers per track, lifetime lubricated
Conventional idlers, lifetime lubricated
Oscillating track roller frames
Track master link
Electrical
24 volt heavy duty brushless alternator
Backup alarm
Electric horn
Two heavy duty batteries, high output, maintenance free, 1,400 CCA
Main disconnect switch
Electric starter (heavy duty, 24 volt)
Operator Environment
Pressurized, sound suppressed, ROPS/ FOPS cab with sealed front windshield, tinted glass and right side sliding window
Air conditioning and heating
Heater/defroster with automatic temperature control
Electro Hydraulic, seat mounted control levers
Rear vision camera
Seat belt, retractable, with buckling indicator on dash
Electronic Monitoring System with gauges for engine coolant temperature, hydraulic oil temperature, fuel level and Diesel Exhaust Fluid level (when equipped)
Mirror, rearview, inside adjustable
Radio ready (Includes 24 to 12 volt converter, speakers, antenna and two 12V power outlets)
Coat hook
Storage compartments under left armrest
Document holder on right console
Floor mat, rubber, heavy duty
Windshield washers and wipers, multiple speed front and rear
Durable metal roof
Parking brake switch and "brake-on" indicator light
Other Standard Equipment
Sound suppression, exterior
Z-bar loader linkage
Load sensing variable displacement implement pump
Implement cylinders with position sensors
Operator programmable lift and tilt kickouts
Engine enclosure with lockable doors
Radiator core 6.5 fins-per-inch, debris resistant
Hinged radiator guard and swing out fan
Full bottom guards
Lift cylinder guards
Oil gauge guard
Product Link ready
Oil sampling valves
Cat XT hoses
HYDO Advanced 10
Optional Equipment:
Note
Standard and optional equipment may vary. Consult your Cat dealer for details.
Power Train
Cat C9.3 diesel engine with engine mounted aftertreatment to meet U.S. EPA Tier 4 Final/ EU Stage V/Japan 2014 (Tier 4 Final)/ Korea Tier 4 Final emission standards
Cat C9.3 diesel engine to meet China Nonroad Stage III and UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage IIIA
Engine thermal shield
Fan, basic
Fan, reversing
Fan, reversing, low speed
Fan, reversing, Steel Mill
Air inlet, precleaner turbine
Operator Environment
Deluxe cab
Steel Mill cab
Seat, cloth, air suspension, no side-to-side isolator
Seat, cloth, air suspension, heated, side-to-side isolator
Transmission control, V-lever or joystick
Radio, AM/FM/AUX/USB/Bluetooth
Cab air precleaner
Hydraulics
Hydraulic oil, biodegradable
Hydraulic oil, EcoSafe (Steel Mill Arrangement)
General Purpose Hydraulics Packages: Two-valve, joystick; Three-valve, joystick; Two-valve, two levers; or Three-valve, two levers
Multi-Purpose Hydraulics Packages: Three-valve, joystick; or Four-valve, joystick
Guards
Tilt cylinder guards
Guard, front lights
Windshield protection
Final drive abrasion guard
Final drive abrasion guard, lower
Electrical
Rotating beacon
Undercarriage
Track roller guard
Track roller guard, Steel Mill
HEAVY DUTY TRACK SEALED AND LUBRICATED TRACK GROUPS (40 SECTIONS)
500 mm (19.7 in) double grouser, center hole
510 mm (20.1 in) extreme service, single grouser, center hole
550 mm (21.6 in) double grouser
675 mm (26.6 in) double grouser
675 mm (26.6 in) double grouser, center hole
675 mm (26.6 in) single grouser, center hole
830 mm (32.7 in) double grouser, wide gauge
HEAVY DUTY SEALED AND NON-LUBRICATED TRACK GROUPS - STEEL MILL
500 mm (19.7 in) double grouser
500 mm (19.7 in) flat
500 mm (19.7 in) triple grouser
500 mm (19.7 in) alternate flat shoe
Buckets
GENERAL PURPOSE BUCKETS
3.0 m3 (4.0 yd3), welded flush adaptors
3.2 m3 (4.2 yd3), pin on
3.2 m3 (4.2 yd3), heavy duty, pin on
3.2 m3 (4.2 yd3), heavy duty, full edge, pin on
4.2 m3 (5.5 yd3), Performance Series
4.0 m3 (5.2 yd3), Performance Series flush
MULTI-PURPOSE BUCKETS
3.0 m3 (4.0 yd3), heavy duty, pin on
3.0 m3 (4.0 yd3), pin on
WIDE BUCKETS
4.2 m3 (5.5 yd3), Performance Series
LANDFILL BUCKETS
4.6 m3 (6.0 yd3), multi-purpose landfill, heavy duty, pin on
4.9 m3 (6.4 yd3), general purpose landfill, heavy duty, pin on
STEEL MILL BUCKET
3.0 m3 (4.0 yd3), slag bucket
Other Attachments
Counterweight
Counterweight, heavy duty bumper
Multi-shank ripper
Ripper hitch
Rear striker bars
Standard bumper
No bumper
Standard rear step
Ripper rear step
ADDITIONAL WORK TOOLS (please consult your Cat dealer for ordering information)
Quick coupler
Blades
Forks
Material handling arms
Rakes
Starters, Batteries And Alternators
Engine coolant heater, 120V
Engine coolant heater, 240V
Maintenance And Related Attachments
Maintenance package, deluxe
High speed oil change
Sediment pump
Fuel tank refueling pump
Service package, standard
Locking bar that holds cab at 30 degrees safely, front windshield
Extended service package with manual hydraulic system enabling cab tilt/lock and shovel holder (shovel not included)
