Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ļ¬ywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
WeightsĀ
Operating Weight
17855lb
Weights
Operating Weight - LGP
18839lb
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight - LGP, 762 mm/30 in
19295lb
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
Transmission
Drive Pumps
1
Maximum Travel Speed - Reverse
6.2mile/h
Relief Valve Settings
7033psi
Maximum Travel Speed - Forward
5.6mile/h
Track Motors
2
Hydraulic Controls
Pump Output
17.2gal/min
Relief Valve Settings
2988psi
Winch
Weight
1345lb
Winch Drive
Hydrostatic
Control
Hydraulic
Speed
Variable
Drum Capacity - Optional Cable
256ft
Maximum Line Speed - Full Drum
207ft/min
Rope Diameter - Optional
0.75in
Maximum Line Pull - Full Drum
25000lb
Maximum Line Speed - Bare Drum
131ft/min
Rope Diameter - Recommended
0.63in
Drum Width
10.8in
Drum Capacity - Recommended Cable
371ft
Maximum Line Pull - Bare Drum
40000lb
Drum Diameter
10in
Winch Length
27.76in
Throat Clearance
6.75in
Overall Width
29.2in
Ripper
Type
Parallelogram
Number of Shanks
3
Height
6.5in
Weight
1222lb
Maximum Ground Clearance Under Tip
17.6in
Maximum Digging Depth
13.3in
Overall Width
67.3in
Maximum Reach - Ground Line
30.2in
EngineĀ
Power TrainĀ
Hydrostatic
Cab
FOPS
ISO 3449:2005 Level II
ROPS
ISO 3471:2008
Undercarriage
Length - Track on Ground - LGP, 762 mm (30 in)
89in
Length - Track on Ground - LGP
89in
Track Gauge - LGP
68in
Shoe Width - LGP, 762 mm (30 in)
30in
Track Gauge - LGP, 762 mm (30 in)
73in
Shoe Width - LGP
25in
Track Gauge
59in
Shoe Width - Standard
16in
Ground Pressure - LGP
4.3psi
Ground Pressure - LGP, 762 mm (30 in)
3.7psi
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43
Number of Rollers - Each Side
6
UndercarriageĀ
Length of Track on GroundĀ
89in
Number of Shoes - Each Side - Abrasion UndercarriageĀ
38
Ground PressureĀ
6.45psi
Service Refill Capacities
Final Drive - Each - LGP
2.6gal (US)
Cooling System
4.2gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.9gal (US)
Transmission - Hydraulic Tank
23.8gal (US)
Fuel Tank
51.5gal (US)
Crankcase - With Filter
2.8gal (US)
Service Refill CapacitiesĀ
Final Drives - Each SideĀ
2.6gal (US)
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the ļ¬uorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Dimensions
BLADE: Blade Capacity (SAE) - LGP
2.17ydĀ³
BLADE: Blade Lift Height - LGP
28.7in
BLADE: Maximum Tilt - LGP
17.2in
BLADE: Blade Width - LGP
124in
Ground Clearance - LGP
13in
BLADE: Blade Width at Maximum Angle - LGP
113.1in
BLADE: Digging Depth - LGP
23in
Track Gauge - LGP
67.9in
Ground Clearance - LGP, 762 mm (30 in)
13in
BLADE: Blade Height - LGP
33.8in
Overall Length - With Blade - LGP, 762 mm (30 in)
167.8in
Track Gauge - LGP, 762 mm (30 in)
73in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52Ā° to 58Ā°
BLADE: Maximum Angle (either side) - LGP
25Ā°
Overall Length - With Blade - LGP
167.8in
Note
*Abrasion Undercarriage
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
129.6in
Width of Dozer (standard shoes, no blade) - Standard
74.8in
Length of Basic Dozer (without blade) - Standard
129.6in
Length of Basic Dozer (without blade) - LGP
129.6in
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
