The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Emissions
The 730 meets Tier 4 Final and Stage V emission standards.
Note (2)
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (1)
The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Note (4)
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Note (5)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio
Weights
Rated Payload
31ton (US)
Body Capacities
Heaped (SAE 2:1)
23ydĀ³
Struck
17.4ydĀ³
Tailgate Heaped SAE 2:1
24.6ydĀ³
Tailgate Struck
18.2ydĀ³
Transmission
Forward - 1
5mile/h
Forward - 2
9mile/h
Forward - 3
14mile/h
Forward - 4
21mile/h
Forward - 5
29mile/h
Forward - 6
34mile/h
Reverse - 1
6mile/h
Service Refill Capacities
Fuel Tank
108.8gal (US)
Cooling System
21.9gal (US)
Hydraulic System
29.1gal (US)
Engine Crankcase
10gal (US)
Transmission
12.4gal (US)
Final Drives/Differential
33gal (US)
Output Transfer Gear Box
6.3gal (US)
DEF Tank
5.3gal (US)
Sound Levels
Interior Cab
72dB(A)
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Body Hoist
Raise Time
12s
Lower Time
8s
Standards
Brakes
ISO 3450 ā 2011
Cab - FOPS
ISO 3449 Level II ā 2005
Cab - ROPS
ISO 3471 ā 2008
Steering
ISO 5010 ā 2007
Operating Weights
Front Axle - Empty
33069lb
Front Axle - Loaded
40300lb
Center Axle - Rated Load
27249lb
Rear Axle - Loaded
36817lb
Center Axle - Loaded
37302lb
Total - Rated Load
61729lb
Front Axle - Rated Load
7231lb
Total - Loaded
114420lb
Center Axle - Empty
10053lb
Rear Axle - Empty
9568lb
Total - Empty
52690lb
Rear Axle - Rated Load
27249lb
Steering
Lock to Lock
4.75 seconds @ 60 rpm
Body Plate
Type
High strength Brinell HB450 wear resistant steel
Turning Circle
Turning Dimensions - Aisle Width
210in
Turning Dimensions - Steer Angle - Left/Right
45Ā°
Turning Dimensions - Inside Radius
153in
Turning Dimensions - SAE Turning Radius
294in
Note
Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Clearance Radius
318in
Body Plate Thickness
Base Plate
0.51in
Side Plates
0.43in
Front Plate
0.28in
Optimal Loader/Truck Pass Matching
Wheel Loaders: 966M/966M XE - Passes
4
Wheel Loader: 962M - Passes
4ā5
Wheel Loader: 950M - Passes
5
Hydraulic Excavators: 336F/336F XE - Passes
5ā6
Hydraulic Excavators: 349F/349F XE - Passes
4ā5
Note
An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased
Wheel Loaders: 972M/972M XE - Passes
3ā4
Standard Equipment:
Note
Standard and optional equipment may vary. Consult your Cat dealer for details.
Operator Environment
Tilt and telescopic steering wheel
Machine operation monitoring system includes: ā Action lamp ā Engine oil pressure ā Primary steering system ā Left and right turn signal ā High beam ā Coolant temperature ā Tachometer ā Parking brake ā Fuel level ā Transmission oil temperature ā Brake system ā Transmission hold ā Hoist control ā Hydraulic system ā Charging system ā Retarder ā Transmission fault ā Traction control system ā Check engine lamp
Combined gear selection and hoist control lever
Glass windows: ā Front, laminated and tinted ā Sides and rear, toughened and tinted
Secondary steering ā electro hydraulic
Heater and defroster with four-speed fan
Retractable belt: Operator seat and second seat
Windshield wiper and washer, two speed, intermittent (front)
Mirrors: extensive arrangement for improved visibility
Windshield wiper and washer, two speed (rear)
Seats: ā Operator: fully adjustable, air suspension ā Trainer: padded with lap belt
Adjustable air vents
Windows opening both sides, tinted
Liquid Crystal Display (LCD): ā Alert indicator ā Selected gear and direction ā Speed or auto shift ā Review Operation and Maintenance Manual (OMM) ā Primary steering failure warning ā Seat belt warning ā Secondary steering failure warning ā Diesel Particulate Filter (DPF) regeneration filter ā Machine Security System (MSS) ready ā Secondary steering energy source engaged ā Hour meter ā Retarder active
Sun visor
Touchscreen display incorporating the rearview camera video feed
Storage: ā Cup holder ā Flask receptacle ā Under seat storage ā Door pocket ā Behind operator seat storage ā Coat hook
Air conditioning with R134A refrigerant
Cat Technologies
Cat Detect with Stability Assist
Product Link
Electrical And Lighting
Electrical system: 24-volt, 10A 24- to 12-volt converter
Main disconnect switch
Batteries (two) maintenance free
Remote starting receptacle (cables not included)
Horn
Lighting systems: ā Cab interior ā Two head lamps ā Two width marker ā Two reversing ā Work light/cab access light ā Two stop/tail lights ā Front and rear direction indicators
Power Train
Differentials: standard with automatic clutched inter- and cross-axle differential locks
Auto shift six-speed forward and one reverse transmission
Dual circuit oil immersed, enclosed brakes ā all wheels
Retarder: engine compression brake
Cat C13 engine
Three axle, six-wheel drive
Cat Clean Emission Module (CEM) and exhaust aftertreatment package
Safety
Rearview camera
ROPS/FOPS cab
Reverse alarm
Guards
Radiator
Rear window
Axle
Front dump body spill guard, integral part of fabricated body
Crankcase
Other Standard Equipment
Sound suppression (only standard in Europe)
Tires, six 23.5R25, radial
Vandalism protection: lockable caps
Mud flaps: wheel arch and body mounted with transportation tiebacks
SĀ·OĀ·S sampling valves
Optional Equipment:
Note
Standard and optional equipment may vary. Consult your Cat dealer for details.
Optional Equipment
Window blinds
Auto lube installation for automatic greasing of bearings
Ether start
Cold weather start attachment
Four-point seat belt
Machine Security System (MSS)
Bare chassis (no body) standard wheel base
Fuel additive ā anti-waxing
Sound suppression (only standard in Europe)
Cold weather coolant ā51Ā° C (ā60Ā° F)
Wheel chocks
Flashing LED beacon
Engine block heater
Bluetooth radio stereo system
Exhaust heated body
Product Link Elite: PLE631 (satellite), PLE641 (cellular). Product Link is optional.
Heated rearview motorized mirrors
Body liners
Bare chassis (no body) long wheel base
Infrared glass ā high ambient cab
Heated/cooled seat
Roof mounted High Intensity Discharge (HID) work lights
Cat Production Measurement payload monitoring system