Power Rating
- Maximum Power
-
24.6HP
- Maximum Torque
-
63.4lb-ft @ 1800 rpm
- Rated Speed
-
2200/2800 rpm
- Minimum Power
-
24.6HP
Emission Standards
- Emissions
-
U.S. EPA Tier 4 Final
General
- Engine Configuration
-
In-Line 3
- Bore
-
3.3in
- Stroke
-
3.5in
- Displacement
-
91in³
- Compression Ratio
-
22.5:1
- Aspiration
-
Naturally Aspirated (NA)
- Combustion System
-
Indirect Injection
- Rotation from Flywheel End
-
Counterclockwise
- Aftertreatment
-
-
Engine Dimensions - Approximate
- Length
-
22.5in
- Width
-
17.9in
- Height
-
25.3in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
-
327lb
Standard Equipment:
-
- Air Inlet System
-
- Inlet manifold with choice of inlets.
-
- Control System
-
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
- Tier 4 Final: Alternator 12V 85 amp
-
- Cooling System
-
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
-
- Flywheel & Flywheel Housing
-
- Naturally Aspirated: SAE No. 7 1/2 flywheel
- Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing
-
- Fuel System
-
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
-
- Lube System
-
- Alternative oil fillers
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
-
- Power Take Off (pto)
-
- Provision for Power Take Off (PTO)
-
- General
-
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
Optional Equipment:
