The 735 meets Tier 4 Final and Stage V emission standards.
Peak Engine Torque Gross (SAE J1995)
1614ftĀ·lbf
Note (3)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
No Engine De-rating Below
12500ft
Note (2)
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Net Power - ISO 14396
429HP
Gross Power - SAE J1995
434HP
Note (5)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio
Note (4)
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Note (1)
The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Engine Model - U.S. EPA Tier 4 Final/EU Stage V
Cat C13
Net Power - SAE J1349
424HP
Weights
Rated Payload
35.3ton (US)
Body Capacities
Heaped (SAE 2:1)
26.2ydĀ³
Struck
20.3ydĀ³
Tailgate Heaped SAE 2:1
27.9ydĀ³
Tailgate Struck
21.3ydĀ³
Transmission
Forward - 1
5mile/h
Forward - 2
9mile/h
Forward - 3
14mile/h
Forward - 4
22mile/h
Forward - 5
30mile/h
Forward - 6
35mile/h
Reverse - 1
6mile/h
Service Refill Capacities
Fuel Tank
108.8gal (US)
Cooling System
21.9gal (US)
Hydraulic System
29.1gal (US)
Engine Crankcase
10gal (US)
Transmission
12.3gal (US)
Final Drives/Differential
33gal (US)
Output Transfer Gear Box
5.5gal (US)
DEF Tank
5.3gal (US)
Sound Levels
Interior Cab
72dB(A)
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the
Body Hoist
Raise Time
12s
Lower Time
11s
Standards
Brakes
ISO 3450 ā 2011
Cab - FOPS
ISO 3449 Level II ā 2005
Cab - ROPS
ISO 3471 ā 2008
Steering
ISO 5010 ā 2007
Operating Weights
Total - Loaded
126192lb
Front Axle - Empty
34128lb
Total - Rated Load
70548lb
Rear Axle - Loaded
41270lb
Rear Axle - Empty
10516lb
Center Axle - Empty
11001lb
Center Axle - Rated Load
30754lb
Front Axle - Loaded
43166lb
Total - Empty
55645lb
Front Axle - Rated Load
9039lb
Rear Axle - Rated Load
30754lb
Center Axle - Loaded
41756lb
Steering
Lock to Lock
4.75 seconds @ 60 rpm
Body Plate
Type
High strength Brinell HB450 wear resistant steel
Turning Circle
Turning Dimensions - SAE Turning Radius
294in
Turning Dimensions - Inside Radius
149in
Turning Dimensions - Clearance Radius
318in
Note
Dimensions are for machines equipped with 750/65 R25 tires.
Turning Dimensions - Steer Angle - Left/Right
45Ā°
Turning Dimensions - Aisle Width
212in
Optimal Loader/Truck Pass Matching
Hydraulic Excavators: 336F/336F XE - Passes
5ā6
Note
An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased
Hydraulic Excavators: 349F/349F XE - Passes
4ā5
Wheel Loaders: 972M/972M XE - Passes
3ā4
Wheel Loader: 962M - Passes
4ā5
Wheel Loader: 950M - Passes
5
Wheel Loaders: 966M/966M XE - Passes
4
Body Plate Thickness
Base Plate
0.51in
Front Plate
0.28in
Side Plates
0.43in
Standard Equipment:
Note
Standard and optional equipment may vary. Consult your Cat dealer for details.
Operator Environment
Tilt and telescopic steering wheel
Adjustable air vents
Retractable belt: Operator seat and second seat
Glass windows: ā Front, laminated and tinted ā Sides and rear, toughened and tinted
Liquid Crystal Display (LCD): ā Alert indicator ā Selected gear and direction ā Speed or auto shift ā Review Operation and Maintenance Manual (OMM) ā Primary steering failure warning ā Seat belt warning ā Secondary steering failure warning ā Diesel Particulate Filter (DPF) regeneration filter ā Machine Security System (MSS) ā Secondary steering energy source engaged ā Hour meter ā Retarder active
Air conditioning with R134A refrigerant
Mirrors: extensive arrangement for improved visibility
Combined gear selection and hoist control lever
Seats: ā Operator: fully adjustable, air suspension ā Trainer: padded with lap belt
Sun visor
Windshield wiper and washer, two speed (rear)
Windshield wiper and washer, two speed, intermittent (front)
Windows opening side, tinted
Storage: ā Cup holder ā Flask receptacle ā Under seat storage ā Door pocket ā Behind operator seat storage ā Coat hook
Touchscreen display incorporating the rearview camera video feed
Secondary steering ā electro hydraulic
Heater and defroster with four-speed fan
Machine operation monitoring system includes: ā Action lamp ā Engine oil pressure ā Primary steering system ā Left and right turn signal ā High beam ā Coolant temperature ā Tachometer ā Parking brake ā Fuel level ā Transmission oil temperature ā Brake system ā Transmission hold ā Hoist control ā Hydraulic system ā Charging system ā Retarder ā Transmission fault ā Traction control system ā Check engine lamp
Cat Technologies
Cat Detect with Stability Assist
Product Link
Electrical And Lighting
Remote starting receptacle (cables not included)
Horn
Lighting systems: ā Cab interior ā Two head lamps ā Two width marker ā Two reversing ā Work light/cab access light ā Two stop/tail lights ā Front and rear direction indicators
Main disconnect switch
Electrical system: 24-volt, 10A 24- to 12-volt converter
Batteries (two) maintenance free
Power Train
Differentials: standard with automatic clutched inter- and cross-axle differential locks
Cat Clean Emission Module (CEM) and exhaust aftertreatment package
Cat C13 engine
Three axle, six-wheel drive
Retarder: engine compression brake
Dual circuit oil immersed, enclosed brakes ā all wheels
Auto shift six-speed forward and one reverse transmission
Safety
Rearview camera
ROPS/FOPS cab
Reverse alarm
Guards
Radiator
Front dump body spill guard, integral part of fabricated body
Crankcase
Rear window
Axle
Other Standard Equipment
Tires, six 750/65 R25
Mud flaps: wheel arch and body mounted with transportation tiebacks
SĀ·OĀ·S sampling valves
Vandalism protection: lockable caps
Sound suppression (only standard in Europe)
Optional Equipment:
Note
Standard and optional equipment may vary. Consult your Cat dealer for details.
Optional Equipment
Engine block heater
Heated rearview motorized mirrors
Scissor tailgate
Ether start
Flashing LED beacon
Cold weather start attachment
Infrared glass ā high ambient cab
Product Link Elite: PLE631 (satellite), PLE641 (cellular). Product Link is optional.
Bare chassis (no body) standard wheel base
Fuel additive ā anti-waxing
Body liners
Bare chassis (no body) long wheel base
Four-point seat belt
Auto lube installation for automatic greasing of bearings
Cat Production Measurement payload monitoring system
Sound suppression (only standard in Europe)
Fast fuel fill
Heated/cooled seat
Roof mounted High Intensity Discharge (HID) work lights