Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800r/min
Engine Model
CatĀ® C7.1
Displacement (Performance Power Mode: Speed Range 1-4)
428inĀ³
Emissions
Engine meets U.S. EPA Tier 4 Final emission standards.
Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
170HP
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168HP
Note (1)
*The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Note (2)
**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (3)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156HP
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**)
1600r/min
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
158HP
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**)
160HP
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**)
162HP
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601ftĀ·lbf
Stroke - Performance Power Mode: Range 1-4
5.3in
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
797NĀ·m
Note (4)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Bore (Standard Power Mode: Range 1-4)
4.1in
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156HP
Stroke (Standard Power Mode: Range 1-3**)
5.3in
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166HP
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164HP
Bore (Standard Power Mode: Range 1-3**)
4.1in
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)
587ftĀ·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**)
795NĀ·m
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**)
776NĀ·m
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163HP
Displacement (Standard Power Mode: Range 1-3**)
428inĀ³
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**)
573ftĀ·lbf
Maximum Rated Gross Power - ISO 14396
168HP
Maximum Rated Gross Power - ISO 14396 (metric)
170mhp
Weights
Operating Weight
31382lb
Buckets
Bucket Capacities
2.1-5.0 mĀ³ (2.7-6.5 ydĀ³)
Bucket Capacities - Light Material
3.1-5.0 mĀ³ (4.0-6.5 ydĀ³)
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (1)
*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
101dB(A)
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
68dB(A)
Axles
Front
Fixed; Locking differential (standard)
Rear
Oscillating Ā±11 degrees; Open differential (standard); Limited slip differential (optional)
Transmission
Reverse - Range 1*
8mile/h
Note
Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine
Forward - Range 2
8mile/h
Forward - Range 1*
1-13 km/h (0.6-8 mph)
Reverse - Range 4
25mile/h
Reverse - Range 2
8mile/h
Forward - Range 3
17mile/h
Forward - Range 4
25mile/h
Reverse - Range 3
17mile/h
Steering
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4s
Maximum Flow - Steering Pump
34gal/min
Maximum Working Pressure - Steering Pump
3500psi
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.5turns
Steering Articulation Angle - Each Direction
40Ā°
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cylinder, Double Acting - Bore Diameter
2.8in
Steering Cylinder, Double Acting - Stroke
17.2in
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8s
Steering Cylinder, Double Acting - Rod Diameter
1.6in
Loader Hydraulic System
Maximum Flow - Implement Pump
50gal/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42gal/min
Maximum Working Pressure - Implement Pump
4061psi
Note
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
Relief Pressure - Tilt Cylinder
4351psi
Cycle Times - 1,600 rpm - Standard: Total Cycle Time
10.1s
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)
1.5s
Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time
9.3s
Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)
2.7s
Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)
5.1s
Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)
2.7s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061psi
Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)
1.7s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4351psi
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)
5.7s
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50gal/min
Lift Cylinder: Standard Lift Linkage - Bore Diameter
4.3in
Tilt Cylinder: Standard Lift Linkage - Stroke
21.9in
Tilt Cylinder: Standard Lift Linkage - Rod Diameter
2.8in
Lift Cylinder: Standard Lift Linkage - Rod Diameter
2.4in
Tilt Cylinder: Standard Lift Linkage - Bore Diameter
5.1in
Lift Cylinder: Standard Lift Linkage - Stroke
28.7in
Service Refill Capacities
Axles - Front
6.9gal (US)
Axles - Rear
6.6gal (US)
Cooling System
7.9gal (US)
Diesel Exhaust Fluid (DEF) Tank
5gal (US)
Engine Crankcase
5.3gal (US)
Fuel Tank
51.5gal (US)
Hydraulic System - Including Tank
43.6gal (US)
Hydraulic Tank
23.8gal (US)
Transmission - Gear Box
2.2gal (US)
Tires
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Dimensions with Bucket - Standard Lift
Height - Ground Clearance**
1.3ft
Rack Angle at Carry
43Ā°
Departure Angle
33Ā°
Length - Wheel Base
9.8ft
Length - Rear Axle to Bumper
6.5ft
Turning Radius - Over Bucket
19.5ft
Carry Height - Bucket Pin
1.3ft
Width - Over Tires
8.3ft
Note (2)
**Vary with tire.
Dig Depth**
3.9in
Turning Radius - Outside of Tires
17.7ft
Clearance - Level Bucket**
11.75ft
Clearance - Bucket at 45Ā°*
9.1ft
Rack Angle at Full Lift
54Ā°
Height - Overall**
17.1ft
Width - Bucket
8.4ft
Height - Ground to Axle Center**
2.25ft
Height - Bucket Pin**
12.8ft
Operating Weight
31125lb
Width - Tread Center
6.3ft
Turning Radius - Inside of Tires
9.4ft
Reach - Bucket at 45Ā°*
3.6ft
Length - Overall*
24.9ft
Clearance - Load over Height**
10.9ft
Length - Hitch to Front Axle
4.9ft
Height - Ground to Beacon**
12.2ft
Articulation Angle
40Ā°
Height - Ground to Cab**
10.9ft
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 mĀ³ (3.0 ydĀ³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Note (1)
*Vary with bucket.
Dump Angle at Full Lift
48Ā°
Dimensions with Bucket - High Lift
Length - Rear Axle to Bumper
6.5ft
Departure Angle
33Ā°
Height - Overall**
18.7ft
Reach - Bucket at 45Ā°*
4.4ft
Dump Angle at Full Lift
48Ā°
Width - Bucket
8.4ft
Length - Wheel Base
9.8ft
Width - Tread Center
6.3ft
Length - Hitch to Front Axle
4.9ft
Height - Ground to Axle Center**
2.25ft
Note (1)
*Vary with bucket.
Clearance - Bucket at 45Ā°*
10.7ft
Height - Bucket Pin**
14.4ft
Height - Ground to Beacon**
12.2ft
Carry Height - Bucket Pin
1.9ft
Clearance - Load over Height**
11.6ft
Turning Radius - Outside of Tires
17.7ft
Turning Radius - Over Bucket
20.6ft
Rack Angle at Full Lift
51Ā°
Rack Angle at Carry
47Ā°
Length - Overall*
27ft
Note (2)
**Vary with tire.
Height - Ground to Cab**
10.9ft
Turning Radius - Inside of Tires
9.4ft
Clearance - Level Bucket**
13.4ft
Width - Over Tires
8.3ft
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 mĀ³ (3.0 ydĀ³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Secondary display to enable features and adjust parameters
LED interior lighting
Sunscreen, front and rear
Touchscreen secondary display
Ride control adjustable speed activation
Preventative maintenance reminders
Integrated help function (26 languages)
Camera, roof mounted, front view with separate display
Cat Production Measurement weigh scale system integrated into secondary display
Cold start package
Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
Coupler, (Fusion and ISO 23727)
Fenders (extended cover and full coverage)
Differential, limited slip, rear
Guarding packages
Lights, auxiliary, halogen or LED with engine and DEF compartment lights
Linkage, high lift
Payload Technology
Cat Production Measurement (CPM)
CPM Printer
Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
Radio packages
Ride Control System, adjustable through secondary display
Seats
Deluxe seat ā fully adjustable fabric air suspension seat with mid seat backrest
Premium seat ā fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.