Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ļ¬ywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Weights
Operating Weight
20639.68lb
Operating Weight - LGP
21369lb
Operating Weight - LGP, 762 mm/30 in
21810lb
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
WeightsĀ
Operating Weight
20640lb
Transmission
Drive Pumps
1
Maximum Travel Speed - Forward
5.6mile/h
Maximum Travel Speed - Reverse
6.2mile/h
Track Motors
2
Relief Valve Settings
7033psi
Hydraulic Controls
Pump Output
17.2gal/min
Relief Valve Settings
2988psi
Winch
Weight
1345lb
Winch Drive
Hydrostatic
Control
Hydraulic
Speed
Variable
Maximum Line Pull - Full Drum
25000lb
Throat Clearance
6.75in
Rope Diameter - Recommended
0.63in
Overall Width
29.2in
Maximum Line Speed - Full Drum
207ft/min
Rope Diameter - Optional
0.75in
Maximum Line Pull - Bare Drum
40000lb
Drum Capacity - Optional Cable
256ft
Winch Length
27.76in
Drum Width
10.8in
Maximum Line Speed - Bare Drum
131ft/min
Drum Capacity - Recommended Cable
371ft
Drum Diameter
10in
Ripper
Type
Parallelogram
Number of Shanks
3
Height
6.5in
Weight
1222lb
Maximum Digging Depth
13.3in
Maximum Reach - Ground Line
30.2in
Overall Width
67.3in
Maximum Ground Clearance Under Tip
17.6in
EngineĀ
Power TrainĀ
Hydrostatic
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Undercarriage
Shoe Width - Standard
20in
Ground Pressure - LGP
4.5psi
Track Gauge - LGP
69in
Length - Track on Ground - LGP
91in
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
40
Ground Pressure - LGP, 762 mm (30 in)
3.9psi
Length - Track on Ground - LGP, 762 mm (30 in)
91in
Shoe Width - LGP
26in
Shoe Width - LGP, 762 mm (30 in)
30in
Track Gauge
63in
Number of Rollers - Each Side
7
Track Gauge - LGP, 762 mm (30 in)
73in
UndercarriageĀ
Ground PressureĀ
5.7psi
Length of Track on GroundĀ
91in
Number of Shoes - Each Side - Abrasion UndercarriageĀ
36
Service Refill Capacities
Cooling System
5gal (US)
Final Drive - Each - LGP
2.6gal (US)
Crankcase - With Filter
2.8gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.9gal (US)
Transmission - Hydraulic Tank
23.8gal (US)
Fuel Tank
51.5gal (US)
Service Refill CapacitiesĀ
Final Drives - Each SideĀ
2.6gal (US)
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the ļ¬uorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Dimensions
BLADE: Blade Width - LGP
126.7in
Track Gauge - LGP, 762 mm (30 in)
73in
BLADE: Digging Depth - LGP
23.2in
Track Gauge - LGP
67.9in
BLADE: Blade Capacity (SAE) - LGP
3.06ydĀ³
BLADE: Blade Width at Maximum Angle - LGP
115.8in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52Ā° to 58Ā°
Ground Clearance - LGP, 762 mm (30 in)
13in
BLADE: Blade Height - LGP
39.8in
BLADE: Blade Lift Height - LGP
30.2in
Ground Clearance - LGP
13in
Overall Length - With Blade - LGP, 762 mm (30 in)
169.6in
Overall Length - With Blade - LGP
169.6in
BLADE: Maximum Tilt - LGP
17.7in
BLADE: Maximum Angle (either side) - LGP
25Ā°
Note
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
Length of Basic Dozer (without blade) - Standard
128.7in
Dozer Height - Standard
109in
Width of Dozer (standard shoes, no blade) - LGP
92.9in
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
103.5in
Length of Basic Dozer (without blade) - LGP
128.7in
Dozer Height - LGP, 762 mm (30 in)
109in
Width of Dozer (standard shoes, no blade) - Standard
83in
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)